[elements.nick]

Hi there,

I'm having some issues getting my ryco street legal kit wired properly and the issue seems to be at the driver side rear wiring connection. All the info from videos and instructions for the newer commanders only have a orange with white wire, blue with white stripe and a black ground. Mine howsoever has some additional wires and some kind of weird connectors that I don't feel comfortable cutting. All the turn signals work except the front drivers side stays constant amber if I apply the brake and both back signals flash if I am turning left.? Right side, horn and flashers all work properly. Any help on this would be greatly appreciate

d.

 

[gregory.l.riley]

Hi there, I'm having some issues getting my ryco street legal kit wired properly and the issue seems to be at the driver side rear wiring connection. All the info from videos and instructions for the newer commanders only have a orange with white wire, blue with white stripe and a black ground. Mine howsoever has some additional wires and some kind of weird connectors that I don't feel comfortable cutting. All the turn signals work except the front drivers side stays constant amber if I apply the brake and both back signals flash if I am turning left.? Right side, horn and flashers all work properly. Any help on this would be greatly appreciate View attachment 1508 View attachment 1509 View attachment 1509 d.

I had the same problem. The fix is cutting the wire that goes direct to the tail light itself and eliminate the diode. Its there because of the tail lights being LED most likely.

 

[gregory.l.riley]

I had the same problem. The fix is cutting the wire that goes direct to the tail light itself and eliminate the diode. Its there because of the tail lights being LED most likely.

 

[gregory.l.riley]

Accutaully that looks like a resistor, none the less, eliminatining it and going directly to the light (white/orange) fixes the problem.