[h2oman]

I tired dowloading the 2011-2012 Service Manual that was posted by another member via some sort of file download service embedded in the link and all I get is a message once the Manual is downloaded that the "file is damaged and cannot be opened".

I have the laterst version of Adobe etc and had no issues with the download itself.

Just wondering if there is another link where I can get it from?

Thanks

 

[LBR]

I tired dowloading the 2011-2012 Service Manual that was posted by another member via some sort of file download service embedded in the link and all I get is a message once the Manual is downloaded that the "file is damaged and cannot be opened".

I have the laterst version of Adobe etc and had no issues with the download itself.

Just wondering if there is another link where I can get it from?

Thanks

Yes, there is one on this site also somewhere ....will look for it later and post the link

Sent by my twin-turbo Droid Razr

 

[LBR]

HA!!!...found it that quick ....amazing

http://www.commandertalk.com/showthread.php?p=11262

Sent by my twin-turbo Droid Razr

 

[h2oman]

HA!!!...found it that quick ....amazing

2012 Commander service manual - Can-Am Commander Forums: Can-Am SSV Commander Forum

Sent by my twin-turbo Droid Razr

That is the one found with the search menu ad downloaded already. It shows the file is damaged and will not open for me. I will keep looking... thanks Lance

 

[CrankShaft]

That is the one found with the search menu ad downloaded already. It shows the file is damaged and will not open for me. I will keep looking... thanks Lance

Ryan...thats the link I posted and I just downloaded the manual from that link and was able to open it just fine...I saved it to my desktop and opened it with Adobe Reader X 10.1.2

Service Manual

 

[h2oman]

Ryan...thats the link I posted and I just downloaded the manual from that link and was able to open it just fine...I saved it to my desktop and opened it with Adobe Reader X 10.1.2

Service Manual

Thanks Jim(Crank) - Going to try this link again as that is the one I used. Maybe I need to sign up for the "premium" package to get it to work.

 

[mcmantim]

Ryan, you do not need the premium package to get the manual, but you do have to wait for the count down timer to end before clicking on the download. I just went out and re-read the special procedures area, I guess I was remembering the swamped vehicle more than I did about the rolled vehicle. for the rolled vehicle it tells you to check the obvious, roll cage, plastic parts, seat belts, door nets. Then to check the air intake and airbox for oil. Check all fluid levels and then start it up and look for error codes and have anything that shows up on the error codes fixed.

 

[h2oman]

Ryan, you do not need the premium package to get the manual, but you do have to wait for the count down timer to end before clicking on the download. I just went out and re-read the special procedures area, I guess I was remembering the swamped vehicle more than I did about the rolled vehicle. for the rolled vehicle it tells you to check the obvious, roll cage, plastic parts, seat belts, door nets. Then to check the air intake and airbox for oil. Check all fluid levels and then start it up and look for error codes and have anything that shows up on the error codes fixed.

Thanks - I am trying again without the "premium". Says it still has like 9 hours to go so I will wait and see. Last time it downloaded fine and then I opend it and it said files were damaged and could not be opened. ... fingers crossed.

My concerns is more A arms, steering, tie rods, alignment etc. Plastics are the easy part. It starts and runs fine with no codes. I have seen strange bends in the suspension and "frames" on our snowmobiles over the years throwing clutches out of whack and other crazy stuff so I want to make sure I cover my bases. My buddy who is also my BRP dealer is going to give it a once over with me next week.

 

[h2oman]

After a few more attempts to download the manual with no success - Still says file is "damaged and could not open" I found it on eBay. One other member did try to email it to me but it was too big a file for them to send.. so thanks for the effort anyways. My Adobe is OK and still not able to open the files. It was about $9.50.. so $12.50 shipped. Should come in handy for the upcoming 10 hours service.

 

[Capt.D]

Have you bought it yet? I may be able to drop box it to you.....

 

[h2oman]

Have you bought it yet? I may be able to drop box it to you.....

Drop box would have been a good solution. Already bought it.. the $12.50 is something I can live with.

Thanks for the offer though...

 

[LBR]

The drop box really works good for Mega files ...wished I had known about it long time ago too!

sent from my twin-turboed Razr