Can-Am Commander Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
188 Posts
Hi Polcat, yes it is just a bolt, you need that to separate the clutch there is a video on how to use it, save your money. Go to a hardware store and buy an 8mmX1.25 that is at least 50mm in length of threads. On the primary there is one hole that the bolt fits in and as you tighten the bolt the halves separate and you can remove the belt.
 

·
Registered
Joined
·
188 Posts
LBR has done a good write up on how to replace the belt and also break the belt in so it does not blow quickly on you, I wish I knew how to link that here so you could just click on it and get to the write up. You might search for LBR and I would bet Lance has answered this in at least three different threads.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top