Can-Am Commander Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I just bought a Commander 1000x with about 1300 miles on it. Took it for a ride the other night (nothing rough) and it went into limp home mode. It would go in and out of limp home mode. While I was trying to get it back home it died. Died, no lights no gages nothing and came right back on? Now my SSV auto bar will not work and it keeps going in and out of limp home mode. I've checked all connections and fuses. Any help???
 

·
Super Moderator
Joined
·
2,337 Posts
Check coolant and oil levels.....when on a side incline duneing with driver on downhill side and oil half way between full and add, ours cuts power.

Remove/insert key several times reading display for error of not recognizing key. I clean the metal part with brakeclean occasionally.

If you let machine cool for awhile when BSing or whatever, then fire up and WOT, it will limp mode because oil thickened up too much....I prefer to warm machines up fully until coolant fan cycles once so oil is thinned out..hope this lends a clue.
 
1 - 2 of 2 Posts
Top