Can-Am Commander Forums banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
543 Posts
Discussion Starter · #1 · (Edited)
I was not liking the black plastic for letters near the shifter for ( P, R, N, L, H ) and in low light or dark it really was no fun. Sure you can look on the dash wile you move your right hand but I look at what I am doing not at the dash.

So I went off what SandCyco did and painted the letters, but with glow in the dark paint. I found white paint that glows white or a little off white like green / blue but it does look white in low light when it is glowing.

I got it from Glow Inc. for about $20 with shipping and they had it to me in a couple of days. I got solvent based but they also have water based. I got 1/2 oz and it came in a bottle like nail polish with a brush. I put on three coats and that works great. You are better off keeping it clean and adding more on the next coat than trying to clean up paint on the edges. You might even want to get a smaller brush.

The link above takes you to the site and you can see they have glow in the dark paint that glows for 24 hours. Maybe find so use for that around the camp site. The link below is the paint I got, White day White night / glow.

Direct link to the White paint I got from Glow Inc.











Light on bright


Light on


Light on dim


Light off
 

·
Premium Member
Joined
·
1,424 Posts
1 - 3 of 3 Posts
Top