Can-Am Commander Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 · (Edited)
for the past several months my commander has been starting weird...
i turn on the key, the lights and gauges all kick on, but when i press and hold the starter button nothing happens no wineing from the starter..nothing ...
i have found by turning the key all the way back off and turning it back on again she fires right up, but some times it takes 2 or 3 times..
it doesn't seem to do it as much after i have ran it for awhile and i have noticed outside temp doesn't matter... it does it in the summer and winter here
I've seen no codes or had any issues with the engine running..
anyone else have this type of issue?
 

·
Registered
Joined
·
13 Posts
sounds like dirty contacts inside the key switch, try some contact cleaner spray in the key slot of the switch, then cycle the key on off a few times , that may help .
 
1 - 2 of 2 Posts
Top