Can-Am Commander Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
what is the tip on checking rear gear box oil level, it hasto be how far below the threads?? and what tip to check it. i simply added 13 ounces as it called for 12 in manual, but want to be sure. thanks guys and gals for the help
 

·
Administrator
Joined
·
2,344 Posts
Can't remember exactly how far below the fill plug it is suppose to be...3/8"-1/2"?....but whatever the measurement is (it's in your manual)....

I took a piece of wire and bent a 3/4" long 90* bend on the tip of it, then started to fill the rear end up with fluid, occasionally checking the level with that wire tip....when the oil started to show on the wire, I snipped that much wire off ....when the wire was as long as the manual stated measurement below the fill hole, plug in.....done.....Lance
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top