[CrankShaft]

I started to install some Highlifter 1.5'' wheel spacers today and torqed the rear spacers to the hubs at 100 foot pounds with some red loctite...just want to know if I went a little overboard on the torqing?

I will torq the wheels to the spacers at the stock specs of 74 foot pounds.

 

[LBR]

Those spacers should be nailed on securely and with that torque on the lug nuts, it's one less thing to worry about when out riding ....you should be good

Sent by my twin-turbo Droid Razr

 

[Odyknuck]

I use red Lockite and a 1/2" Impact to install mine.

 

[dieselpowered]

I would torque the spacers down to the same specs as the wheels.

 

[CrankShaft]

Thanks for your input guys!