Can-Am Commander Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter · #1 ·
Home made windshield till I find one I like.I used a 4x8 sheet of 0.116 lexan that i got for an airplane windscreen that was to thick to use.I now have a full sunroof on the entire top.Used a 1 1/2 conduit clamp with weather striping inside so it doesn't scratch the tube to attach it and then zip ties inbetween to hold it down better. What the hey it works for now!
 

·
Premium Member
Joined
·
1,424 Posts

·
Registered
Joined
·
145 Posts
I almost bought a 4' x 4' chunk at Home Depot the other day and was worried it would bow and break in the cold, but now that I've seen this ... maybe I'll give it a whirl. Nice work ... let us know when the Popeness shows up for a ride. :)
 

·
Registered
Joined
·
49 Posts
Discussion Starter · #4 ·
shield

It doesn't really flex to much that I have noticed I ran it up to 60 mph last night and didn't seem to notice any to speak of.As far as the pope maybe I could get a job at driving him around.
 

·
Registered
Joined
·
49 Posts
Discussion Starter · #5 ·
Will do. Now this is lexan and not plexiglass lexan is stronger and has a uv barrier in it and u can bend it fairly easy with a torch or a good hair dryer.
 
1 - 5 of 5 Posts
Top